Our (1) FastGene® PAGE Protein System is a complete sets including all necessary components which are needed for PAGE protein analysis.
To keep the system flexible, the components included in the systems are also separately available in (2) sets or as (3) spare parts.

PG01-PAGE-system-complete

1 | FastGene® PAGE Protein System

Content of the complete system | PG01


Content Comment Quantity Available as set or spare part  | Cat. No.
Basic components      
Inner electrophoresis chamber with electrodes

Holds two gels/plastic dummy cassettes via the two gel side clip holders (included). The inner chamber is filled with running buffer during the electrophoresis run. The lid is connected to the inner chamber electrodes.

 1 PG11
Inner electrophoresis chamber without electrodes  Holds two gels/plastic dummy cassettes via the two gel side clip holders (included). The inner chamber is filled with running buffer during the electrophoresis run. The lid is placed on top of the inner chamber electrodes. 1 PG12
Gel/Blot chamber tank

The chamber tank holds both inner electrophoresis chambers with a maximum of four gels/plastic dummy cassettes. The chamber is filled with running buffer during the electrophoresis run.

 1 PG05
Gel/Blot chamber lid with electrodes (including power cable)

The lid is positioned on top of the inner electrophoresis chambers and the FastGene® Gel/Blot chamber tank. The power cables (cathode and anode) are connected to the power supply.

 1 PG14
Plastic dummy cassette short The chamber tank can hold a maximum of 4 gels simultanously. In case 1 or 3 gels are used with the system, a gel is replaced with a short or long plastic dummy cassette. 1 PG23
Plastic dummy cassette long The chamber tank can hold a maximum of 4 gels simultanously. In case 1 or 3 gels are used with the system, a gel is replaced with a short or long plastic dummy cassette. 1 PG13
Sealing strips The U sealing strips are placed between the inner electrophoresis chambers and the gels/plastic dummy cassettes on both sides. They seal the inner electrophoresis chamber (cathode) from the (outer) gel/blot chamber tank (anode). Depending on the gel size and gel type, different U sealing strips are used.    
U sealing strip long for 10 cm x 10 cm gels E.g. for ThermoFisher™ mini gels 4 PG20 (4x)
U sealing strip short for 10 cm x 8 cm gels E.g., for Bio-Rad TGX™ gels 4 PG18 (4x)
U sealing strip FastGene® 10 cm x 8 cm gels E.g., for FastGene® gels 4 PG19 (4x)
Gel hand-casting set components      
Gel casting base   4

PG21 (1x) | Set PG06 (2x)
 Gel casting clips   4 PG22 (1x) | Set PG06 (2x)
Sealing gaskets   5 PG07 (5x) | Set PG06 (5x)
Gel shovels   5 PG17 (5x) | Set PG06 (5x)
Comb 1 mm 10 wells*   5 Set PG10 (5x)  
Comb 1 mm 15 wells*   5 Set PG10 (5x)
Glass spacer long 1 mm*   5 Set PG10 (5x)
Glass plates short   10 PG04 (10x) | Set PG10 (10x)
Glass plate holder Holding 14 glass plates 1 PG24
Tube holder For 50 mL, 15 mL, 1.5 mL and PCR tubes 1 PG25

 

* The FastGene® PAGE Protein System (PG01) is equipped with a gel hand-casting set for the preparation of hand-cast (polyacrylamide) gels with 1 mm gel thickness. The FastGene® Comb Set 075 (PG02) and FastGene® Comb Set 150 (PG03) are available for the preparation of 0.75 mm gels and 1.5 mm gels, respectively.

2 | Sets

Comb sets and gel casting set


Cat. No. Spare part Description Quantity Available as spare part | Cat. No.
PG02 FastGene® Comb Set 075  Comb set for 0.75 mm gel thickness 1 set  
 

Comb 0.75 mm 10 wells

  

5

  
 

Comb 0.75 mm 15 wells

  

5

  
 

Glass spacer long 0.75 mm

  

5

  
 

10x Glass plate short

  

10

PG04 (10x)
PG10 FastGene® Comb Set 100 Comb set for 1 mm gel thickness 1 set  
  Comb 1 mm 10 wells   5  
  Comb 1 mm 15 wells   5  
  Glass spacer long 1 mm   5  
  Glass plate short   10 PG04 (10x)
PG03 FastGene® Comb Set 150 Comb set for 1.5 mm gel thickness 1 set  
  Comb 1.5 mm 10 wells   5  
  Comb 1.5 mm 15 wells   5  
  Glass spacer long 1.5 mm   5  
  Glass plate short   10 PG04 (10x)
PG06 FastGene® Casting Stand Set   1 set  
  Gel casing base   2 PG21 (1x)
  Casting clip   2 PG17 (1x)
  Sealing gasket   5 PG07 (5x)
  Gel shovel

 

 5 PG17 (5x)

 

3 | Spare parts

Individual components available separately


Cat. No. Spare part Description Quantity Components included in | Cat. No.
  Basic components      
PG11 Inner electrophoresis chamber with electrodes Holds two gels/plastic dummy cassettes via the two gel side clip holders (included). The inner chamber is filled with running buffer during the electrophoresis run. The lid is connected to the inner chamber electrodes. 1 PG01
PG12 Inner electrophoresis chamber without electrodes  Holds two gels/plastic dummy cassettes via the two gel side clip holders (included). The inner chamber is filled with running buffer during the electrophoresis run. The lid is placed on top of the inner chamber electrodes. 1 PG01
PG05 Gel/Blot chamber tank

The chamber tank holds both inner electrophoresis chambers with a maximum of four gels/plastic dummy cassettes. The chamber is filled with running buffer during the electrophoresis run.

 

1

 PG01
PG14 Gel/Blot chamber lid with electrodes The lid is positioned on top of the inner electrophoresis chambers and the FastGene® Gel/Blot chamber tank. The power cables (cathode and anode) are connected to the power supply. 1 PG01
PG23 Plastic dummy cassette short | 10 cm x 8 cm The chamber tank can hold a maximum of 4 gels simultanously. In case 1 or 3 gels are used with the system, a gel is replaced with a short or long plastic dummy cassette. 1 PG01
PG13 Plastic dummy cassette long | 10 cm x 10 cm The chamber tank can hold a maximum of 4 gels simultanously. In case 1 or 3 gels are used with the system, a gel is replaced with a short or long plastic dummy cassette. 1 PG01
  Sealing strips      
PG20 U sealing strip long for 10 cm x 10 cm gels E.g. for ThermoFisher™ mini gels 4 PG01 (4x)
PG18 U sealing strip short for 10 cm x 8 cm gels E.g., for Bio-Rad TGX™ gels 4 PG01 (4x)
PG19 U sealing strip FastGene® 10 cm x 8 cm gels

E.g., for FastGene® gels

 4 PG01 (4x)
  Gel hand-casting set components      
PG21 Gel casting base

 

 1 PG01 | PG06
PG22 Gel casting clip

 

 1 PG01 | PG06
PG07 Sealing gasket

 

 5 PG01 | PG06
PG17 Gel shovel

 

 5 PG01 | PG06
PG04 Glass plate short

 

 10 PG01 | PG02 | PG03 | PG10
PG24 Glass plate holder Holding 14 glass plates 1 PG01
PG25 Tube holder For 50 mL, 15 mL, 1.5 mL and PCR tubes 1 PG01

 

You are not sure which component you need? Contact us!